CPE-2023A 　 IEEE802.11a 54/108Mbps Wireless Outdoor Bridge (200mW), 23dBi Panel-Antenna Integrated, EIRP=46dBm, W/TPC...... Más

　   CPE-2023A 　 IEEE802.11a 54/108Mbps Wireless Outdoor Bridge (200mW), 23dBi Panel-Antenna Integrated, EIRP=46dBm, W/TPC (Intel IXP422 CPU, Atheros RF, IEEE802.3af POE) 　  　 PHEENET CPE-2023A is an IEEE802.11a Wireless Outdoor Bridge with 23dBi Panel Antenna Integrated (EIRP46dBm). Because it is a Wireless Outdoor Bridge, we perform it based on Intel IXP422 CPU and Atheros RF to provide the powerful security features, like WEP, advanced WPA, WPA-PSK, IEEE802.1x, Disable SSID Broadcast, MAC Address filtering, etc. Considering the management request in ISP and Enterprise, we also provide VLAN & QoS features. Moreover, the CPE-2023A Wireless Outdoor Bridge can be set as AP, Bridge, AP Client and compatibilities of Win98, Win2000, WinME and Win XP operation systems provide more flexibility and mobility to users. For ISP / WISP, Telecom, or SMB/Enterprise, it is no doubt that CPE-2023A Wireless Outdoor Bridge is an ideal device to build a wireless LAN network   　 　 1. 23dBi Panel Antenna Integrated CPE solution 2. IP68-rated Waterproof Outdoor Housing 3. IP Routing 4. Super A supported, up to 108Mbps 5. Compatible with IEEE802.11a, IEEE802.3af, IEEE802.3u 6. Support 802.11h(spectrum and power control management: DFS and TPC) 7. Supports wireless data encryption with 64/128-bit WEP standard for security 8. Operating Mode: AP, AP Client, Bridge, WDS, AP+Repeating, AP+Bridge 9. Powerful Management: Web Configuration, SNMP MIB, Telnet, Bandwidth Management, Spanning Tree, VLAN, Link Test 10. IEEE802.11d Support by country 11. Easy-to-install, easy-to-manage Outdoor Bridge Solution, and offer long distance Wireless connection 12. Any IP(For Hot Spot Application)   　 　   Industrial Standard 　 --> 　 　   Standard IEEE 802.11a IEEE 802.3u 10/100Base-TX IEEE802.3af 　 　   Interface 10/100Base-TX (RJ-45) x 1 W/ IEEE802.3af POE function 　 　   Security 64/128-bit WEP WPA, WPA-PSK IEEE802.1x Disable Broadcast SSID Wireless Isolation MAC Address Filtering   　 　   RF 　 --> 　 　   Frequency Band 5.8GHz 　 　   Signal Type Direct Sequence Spread Spectrum (DSSS) 　 　   Modulation 802.11a: OFDM (64QAM, 16QAM, QPSK, BPSK) 　 　   Sensitivity -65dBm@54Mbps -66dBm@48Mbps -70dBm@36Mbps -74dBm@24Mbps -77dBm@18Mbps -79dBm@12Mbps -81dBm@9Mbps -82dBm@6Mbps   　 　   Output Power EIRP=46dBm 　 　   Channel By Country (IEEE802.11d) 　 　   Operating Mode AP AP Client Bridge WDS AP + Repeating AP + Bridge 　 　   Management Web SNMP MIB Telnet (SSH) Bandwidth Control Statistic Report Spanning Tree Firmware Upgrade & Backup Config file by Web / TFTP VLAN Link Test 　 　   Hardware 　 --> 　 　   Hardware Platform Intel IXP422 CPU, Atheros RF 　 　   Antenna Type: Panel Direction Polarization: Linear, Horizontal / Vertical Gain: 23dBi VSWR: 2.0:1 Beam width: H-plane 12°, E-plane 12° Impedance: 50Ω 　 　   Environment Operating Temperature:0~50℃ Storage Temperature:0~70℃ Humidity: 5%~95%(non condensing) 　 　   Power Supply Power over Ethernet 　 　   LED Indicators Power, Ethernet, Wireless 　 　   Dimensions 330 (L) x 294 (W) x 35 (H) mm 　 　   Certificate FCC, CE 　

... menos

ZG-5000-I IEEE 802.11g 54Mbps Wireless Outdoor Bridge ZG-5000-I Wireless Outdoor Bridge is ideal...... Más

ZG-5000-I IEEE 802.11g 54Mbps Wireless Outdoor Bridge ZG-5000-I Wireless Outdoor Bridge is ideal for connecting LANs in distant buildings at speeds approaching those of wired Ethernet. This exciting new product is IEEE 802.11g standard compliant and operates at air interface speeds of up to 54 Mbps. Moreover, the products have unique features designed specially for outdoor applications, making it the best wireless building-to-building solution available today in the unlicensed 2.4GHz band market. Feature Description ZG-5000-I IEEE 802.11g 54Mbps Wireless Outdoor Bridge Standard IEEE 802.11g ,IEEE802.11b IEEE 802.3u ,IEEE 802.3af Rate Select 11g模式： Best / 6 / 9 / 12 / 18 / 24 / 36 / 48 / 54 / 108 Mbps 11b模式： Best / 1 / 2 / 5.5 / 11 Mbps Super G Yes Turbo G Yes AP Mode Yes Bridge Mode Point-to-Point, Point-to-Multipoint, Repeater WDS Yes IP Routing Yes DHCP DHCP Server、DHCP Client Power Control Yes Spanning Tree Yes Link Test Yes Smart WDS WDS Service Group ID Wireless Station List Yes Support Protocol TCP/IP、IPX、NetBEUI Security WEP Encryption 64 / 128 / 152 bits MAC Address Control Yes SSID Broadcast Hidden AP Wireless Station Isolation Yes WDS Separator Yes Management Web Management Yes SNMP MIB Yes Telnet SSH Bandwidth Control Yes F/W Upgrade Web / TFTP Backup Config File Web / FTP Physical Antenna Integrated 15dBi Panel Antenna (20°á—30°) LAN One 10/100-BaseTX RJ-45 LAN Port Default Button Yes LED Power / Link / LAN Signal Quality / Wireless Station Quantity Power Supply 100－240V AC,50/60Hz～48V DC/1A Compatible with IEEE 802.3af Channel America: 2.412GHz~2.462GHz Japan: 2.412GHz~2.484GHz Europe: 2.412GHz~2.472GHz China: 2.412GHz~2.472GHz RF Output Power (Max.) 11g：（18dBm±2dBm）+ 15dBi 11b：（21dBm±2dBm）+ 15dBi Sensitivity －65dBm@54Mbps －66dBm@48Mbps －70dBm@36Mbps －74dBm@24Mbps －77dBm@18Mbps －79dBm@12Mps －81dBm@9Mps －82dBm@6Mbps －80dBm@11Mbps －83dBm@5.5Mbps －84dBm@2Mbps －87dBm@1Mbps Power Consumption 200mA@48V Environment Operating Temperature (Optional) －5～60℃ －15～60℃ Storage Temperature -20～80℃ Humidity 5～90%

... menos

　 CPE-2000AN 　 IEEE802.11a 54/108Mbps Wireless Outdoor Bridge(200mW), N-Type Connector, W/TPC (Intel IXP422 CPU, Atheros...... Más

　 CPE-2000AN 　 IEEE802.11a 54/108Mbps Wireless Outdoor Bridge(200mW), N-Type Connector, W/TPC (Intel IXP422 CPU, Atheros RF, IEEE802.3af POE) 　 　 PHEENET CPE-2000AN is an IEEE802.11a Wireless Outdoor Bridge (EIRP23dBm). Because it is a Wireless Outdoor Bridge, we perform it based on Intel IXP422 CPU and Atheros RF to provide the powerful security features, like WEP, advanced WPA, WPA-PSK, IEEE802.1x, Disable SSID Broadcast, MAC Address filtering, etc. Considering the management request in ISP and Enterprise, we also provide VLAN & QoS features. Moreover, the CPE-2000AN Wireless Outdoor Bridge can be set as AP, Bridge, AP Client and compatibilities of Win98, Win2000, WinME and Win XP operation systems provide more flexibility and mobility to users. For ISP / WISP, Telecom, or SMB/Enterprise, it is no doubt that CPE-2000AN Wireless Outdoor Bridge is an ideal device to build a wireless LAN network 　 　 1. IP68-rated Waterproof Outdoor Housing 2. IP Routing 3. Super A supported, up to 108Mbps 4. Compatible with IEEE802.11a, IEEE802.3af, IEEE802.3u 5. Support 802.11h(spectrum and power control management: DFS and TPC) 6. Supports wireless data encryption with 64/128-bit WEP standard for security 7. Operating Mode: AP, AP Client, Bridge, WDS, AP+Repeating, AP+Bridge 8. Powerful Management: Web Configuration, SNMP MIB, Telnet, Bandwidth Management, Spanning Tree, VLAN, Link Test 9. IEEE802.11d Support by country 10. Easy-to-install, easy-to-manage Outdoor Bridge Solution, and offer long distance Wireless connection 11. Any IP (for Hot Spot Application) 　 　 Industrial Standard 　 --> 　 　 Standard IEEE 802.11a IEEE 802.3u 10/100Base-TX IEEE802.3af 　 　 Interface 10/100Base-TX (RJ-45) x 1 W/ IEEE802.3af POE function 　 　 Security 64/128-bit WEP WPA, WPA-PSK IEEE802.1x Disable Broadcast SSID Wireless Isolation MAC Address Filtering 　 　 RF 　 --> 　 　 Frequency Band 5.8GHz 　 　 Signal Type Direct Sequence Spread Spectrum (DSSS) 　 　 Modulation 802.11a: OFDM (64QAM, 16QAM, QPSK, BPSK) 　 　 Sensitivity -65dBm@54Mbps -66dBm@48Mbps -70dBm@36Mbps -74dBm@24Mbps -77dBm@18Mbps -79dBm@12Mbps -81dBm@9Mbps -82dBm@6Mbps 　 　 Output Power EIRP=23dBm 　 　 Channel By Country (IEEE802.11d) 　 　 Operating Mode AP AP Client Bridge WDS AP + Repeating AP + Bridge 　 　 Management Web SNMP MIB Telnet (SSH) Bandwidth Control Link Test Statistic Report Spanning Tree Firmware Upgrade & Backup Config file by Web / TFTP VLAN Link Test 　 　 Hardware 　 --> 　 　 Hardware Platform Intel IXP422 CPU, Atheros RF 　 　 Antenna Connector Conector N-hembra 　 　 Environment Operating Temperature:0~50℃ Storage Temperature:0~70℃ Humidity: 5%~95%(non condensing) 　 　 Power Supply Power over Ethernet 　 　 LED Indicators Power, Ethernet, Wireless 　 　 Dimensions 330 (L) x 294 (W) x 35 (H) mm 　 　 Certificate FCC, CE 　

... menos

TD-8840 uses integrated ADSL2+ transceiver and a 256-MHz MIPS32 CPU.The AFE supports full-rate ADSL connectivity conforming to the ITU and ANSI...... Más

TD-8840 uses integrated ADSL2+ transceiver and a 256-MHz MIPS32 CPU.The AFE supports full-rate ADSL connectivity conforming to the ITU and ANSI specifications; MIPS32 CPU with MMU and 16-KB I-cache/8-KB D-cache is integrated into the device. In addition to the basic DMT physical layer functions, the ADSL PHY supports dual latency ADSL Framing (fast and interleaved) and the I.432 ATM Physical Layer.TD-8840 is a complete plug-and-play solution. With standard Ethernet interface, it can be directly connected to any 10M/100M Ethernet devices,supporting Auto MDI/MDIX. The TD-8840 uses ADSL (Asymmetric Digital Subscriber Line) technology for Internet connection speeds of up to 455x faster than dial-up, while using a standard phone line. With a built-in 4-port switch, up to four network-ready computers or devices can simultaneously be connected to the TD-8840 for access to the Internet. TD-8840 not only use html (web mode through Ethernet port) to configure the MODEM but also use external utility software, too. With TP-LINKÂ’s excellent design of circuit and high quality production, we guarantee ADSL MODEM a high performance, very good stability and easy to use.   Up to 24Mbps downstream speed Supports Annex M, which can double upstream data rates Built-in switch connects four local PCs directly, and daisy-chain out to more hubs and switches as your network grows Built-in DHCP server Administer and Upgrade the Router Remotely over the Internet Easily configure the router with the attached utility   Software Specification ADSL Features  Full-rate ANSI T1.413 Issue 2  ITU-T G.992.1 (G.dmt)  ITU-T G.992.2 (G.lite)  ITU-T G.994.1 (G.hs)  ITU-T G.992.3 (G.dmt.bis)  ITU-T G.992.5  Max 6 kilometers Data Rates  Downstream: Up to 24Mbps  Upstream: Up to 3.5Mbps (With Annex M enabled) ATM Features  UNI 3.1?ATM Adaptation Layer Type 5-AAL5  Multiprotocol encapsulation over ATM (RFC 1483)  UBR, CBR, VBR-rt, VBR-nrt  Supports 8PVCs PPP Features  PPP over ATM (RFC 2364)  PPP over Ethernet (RFC 2516) Switching Features  IEEE 802.1d transparent learning bridging Routing Features  Classical IP and ARP over ATM (RFC 1577/2225), MER  Static routing, IP, TCP, UDP, ARP  NAT, NAPT, DNS, DDNS, DHCP Server  UPnP, Virtual Server, DMZ, Port Trigger Security  NAT  IP filterling  MAC filtering  Parental control VPN Pass Through  IPSec/PPTP/L2TP Pass-through QoS  IP Type of service(ToS)  802.1p Device Management  HTTP, TELNET, Console  Administration and operation software (firmware) upgradable locally by web(HTTP), console(TFTP)  SNMP Hardware Specification Ports  4 10/100M LAN Ports(RJ45)  1 Line Port(RJ11) LED Indicators  ADSL, Alarm, ACT, LAN1~4, Power Dimensions (W*D*H)  7.9*5.5*1.1 in.(200*140*28 mm) Environment  Operating Temperature: 0?~40? (32?~104?)   Storage Temperature: -40?~70? (-40?~158?)   Operating Humidity: 10%~90% non-condensing   Storage Humidity: 5%~90% non-condensing

... menos

TD-8816 is designed to provide a simple and cost-effective ADSL Internet connection for a private Ethernet network. The Router is easy to use. The...... Más

TD-8816 is designed to provide a simple and cost-effective ADSL Internet connection for a private Ethernet network. The Router is easy to use. The TD-8816 connects to an Ethernet LAN or computers via standard Ethernet ports. The ADSL connection  is  made  using  ordinary  telephone  line  with  standard connectors. Multiple workstations can be networked and connected to the Internet using a single Wide  Area  Network  (WAN)  interface  and  single  global  IP  address.  The  advanced  security enhancements,   IP / MAC  Filter ,   Application  Filter   and   URL  Filter   can  help  to  protect  your network  from  potentially  devastating  intrusions  by  malicious  agents  from  the  outside  of  your network.   ADSL The   TD-8816   supports   full-rate   ADSL2+   connectivity   conforming   to   the   ITU   and   ANSI specifications. In addition to the basic DMT physical layer functions, the ADSL2+ PHY supports dual latency ADSL2+ framing (fast and interleaved) and the I.432 ATM Physical Layer.   The device comes with a CD with an Easy Setup Assistant that helps you step by step to configure your Internet connection. This feature allows even novice users to setup the router products without sacrificing any key features, just play the AUTO-RUN CD bundled to have your network set up quickly & hassle-free.   Access a high-speed DSL Internet connection Up to 24Mbps downstream speed Supports Annex M, which can double upstream data rates QoS prioritization based on ToS, DSCP, service type or 802.1p Triple Active Firewalls: SPI, NAT and Packet Filter Supports DHCP, Universal Plug-and-Play (UPnP), and includes a user-friendly Setup Wizard which takes you through configuring your network, step by step Administer and Upgrade the Router Remotely over the Internet Software Specification ADSL Features  Full-rate ANSI T1.413 Issue 2  ITU-T G.992.1 (G.dmt)  ITU-T G.992.2 (G.lite)  ITU-T G.994.1 (G.hs)  ITU-T G.992.3 (G.dmt.bis)  ITU-T G.992.5  Max 6 kilometers Data Rates  Downstream: Up to 24Mbps  Upstream: Up to 3.5Mbps (With Annex M enabled) ATM Features  UNI 3.1/4.0?ATM Adaptation Layer Type 5-AAL5  Multiprotocol encapsulation over ATM (RFC 1483)  UBR, CBR, VBR-rt, VBR-nrt  Supports 8PVCs PPP Features  PPP over ATM (RFC 2364)  PPP over Ethernet (RFC 2516) Switching Features  IGMP snooping  IGMP multicast  Port VLAN  Tag VLAN  IEEE 802.1d transparent learning bridging Routing Features  Classical IP and ARP over ATM (RFC 1577/2225), MER, RIP V1/V2  Static routing, IP, TCP, UDP, ARP  NAT, NAPT, DNS, DDNS, DHCP Server  UPnP, Virtual Server, DMZ  SIP, H323 ALG Security  Stateful Packet Inspection (SPI)  NAT  Packet Filter VPN Pass Through  IPSec/PPTP/L2TP Pass-through QoS  IP Type of service(ToS)  802.1p Device Management  HTTP, TELNET, Console  Administration and operation software (firmware) upgradable locally by WEB, TFTP, FTP, Console  SNMP V1/V2  CWMP(TR-069) Hardware Specification Ports  1 10/100M LAN Ports(RJ45)  1 Line Port(RJ11) LED Indicators  LAN, ADSL, ACT, Power Dimensions (W*D*H)  6.5*4.3*1.1 in.(165*108*28 mm) Environment  Operating Temperature: 0?~40? (32?~104?)   Storage Temperature: -40?~70? (-40?~158?)   Operating Humidity: 10%~90% non-condensing   Storage Humidity: 5%~90% non-condensing

... menos

TD-8841 uses integrated ADSL2+ transceiver and a 256-MHz MIPS32 CPU.The AFE supports full-rate ADSL connectivity conforming to the ITU and ANSI...... Más

TD-8841 uses integrated ADSL2+ transceiver and a 256-MHz MIPS32 CPU.The AFE supports full-rate ADSL connectivity conforming to the ITU and ANSI specifications; MIPS32 CPU with MMU and 16-KB I-cache/8-KB D-cache is integrated into the device. In addition to the basic DMT physical layer functions, the ADSL PHY supports dual latency ADSL Framing (fast and interleaved) and the I.432 ATM Physical Layer.TD-8841 is a complete plug-and-play solution. With standard Ethernet interface, it can be directly connected to any 10M/100M Ethernet devices,supporting Auto MDI/MDIX. The TD-8841 uses ADSL (Asymmetric Digital Subscriber Line) technology for Internet connection speeds of up to 455x faster than dial-up, while using a standard phone line. With a built-in 4-port switch, up to four network-ready computers or devices can simultaneously be connected to the TD-8841 for access to the Internet. TD-8841 not only use html (web mode through Ethernet port) to configure the MODEM but also use external utility software, too. With TP-LINKÂ’s excellent design of circuit and high quality production, we guarantee ADSL MODEM a high performance, very good stability and easy to use.   Access a high-speed DSL Internet connection Up to 24Mbps downstream speed Supports Annex M, which can double upstream data rates Connect your computer using Ethernet or USB Built-in switch connects four local PCs directly, and daisy-chain out to more hubs and switches as your network grows Built-in DHCP server Administer and Upgrade the Router Remotely over the Internet Easily configure the router with the attached utility Software Specification ADSL Features  Full-rate ANSI T1.413 Issue 2  ITU-T G.992.1 (G.dmt)  ITU-T G.992.2 (G.lite)  ITU-T G.994.1 (G.hs)  ITU-T G.992.3 (G.dmt.bis)  ITU-T G.992.5  Max 6 kilometers Data Rates  Downstream: Up to 24Mbps  Upstream: Up to 3.5Mbps (With Annex M enabled) ATM Features  UNI 3.1?ATM Adaptation Layer Type 5-AAL5  Multiprotocol encapsulation over ATM (RFC 1483)  UBR, CBR, VBR-rt, VBR-nrt  Supports 8PVCs PPP Features  PPP over ATM (RFC 2364)  PPP over Ethernet (RFC 2516) Switching Features  IEEE 802.1d transparent learning bridging Routing Features  Classical IP and ARP over ATM (RFC 1577/2225), MER  Static routing, IP, TCP, UDP, ARP  NAT, NAPT, DNS, DDNS, DHCP Server  UPnP, Virtual Server, DMZ, Port Trigger Security  NAT  IP filterling  MAC filtering  Parental control VPN Pass Through  IPSec/PPTP/L2TP Pass-through QoS  IP Type of service(ToS)  802.1p Device Management  HTTP, TELNET, Console  Administration and operation software (firmware) upgradable locally by web(HTTP), console(TFTP)  SNMP Hardware Specification Ports  4 10/100M LAN ports(RJ45)  1 Line port(RJ11)  1 USB 1.1 port LED Indicators  ADSL, Alarm, ACT, USB, LAN1~4, Power Dimensions (W*D*H)  7.9*5.5*1.1 in.(200*140*28 mm) Environment  Operating Temperature: 0?~40? (32?~104?)   Storage Temperature: -40?~70? (-40?~158?)   Operating Humidity: 10%~90% non-condensing   Storage Humidity: 5%~90% non-condensing

... menos

TD-8810 uses integrated ADSL2+ transceiver and a 256-MHz MIPS32 CPU.The AFE supports full-rate ADSL connectivity conforming to the ITU and ANSI...... Más

TD-8810 uses integrated ADSL2+ transceiver and a 256-MHz MIPS32 CPU.The AFE supports full-rate ADSL connectivity conforming to the ITU and ANSI specifications; MIPS32 CPU with MMU and 16-KB I-cache/8-KB D-cache is integrated into the device. In addition to the basic DMT physical layer functions, the ADSL PHY supports dual latency ADSL Framing (fast and interleaved) and the I.432 ATM Physical Layer.TD-8810 is a complete plug-and-play solution. With standard Ethernet interface, it can be directly connected to any 10M/100M Ethernet devices,supporting Auto MDI/MDIX. TD-8810 not only use html (web mode through Ethernet port) to configure the MODEM but also use external utility software, too. With TP-LINK´s excellent design of circuit and high quality production, we guarantee ADSL MODEM a high performance, very good stability and easy to use.   Access a high-speed DSL Internet connection Up to 24Mbps downstream speed Supports Annex M, which can double upstream data rates Built-in DHCP server Administer and Upgrade the Router Remotely over the Internet Easily configure the router with the attached utility Software Specification ADSL Features  Full-rate ANSI T1.413 Issue 2  ITU-T G.992.1 (G.dmt)  ITU-T G.992.2 (G.lite)  ITU-T G.994.1 (G.hs)  ITU-T G.992.3 (G.dmt.bis)  ITU-T G.992.5  Max 6 kilometers Data Rates  Downstream: Up to 24Mbps  Upstream: Up to 3.5Mbps (With Annex M enabled) ATM Features  UNI 3.1?ATM Adaptation Layer Type 5-AAL5  Multiprotocol encapsulation over ATM (RFC 1483)  UBR, CBR, VBR-rt, VBR-nrt  Supports 8PVCs PPP Features  PPP over ATM (RFC 2364)  PPP over Ethernet (RFC 2516) Switching Features  IEEE 802.1d transparent learning bridging Routing Features  Classical IP and ARP over ATM (RFC 1577/2225), MER  Static routing, IP, TCP, UDP, ARP  NAT, NAPT, DNS, DDNS, DHCP Server  UPnP, Virtual Server, DMZ, Port Trigger Security  NAT  IP filterling  MAC filtering  Parental control VPN Pass Through  IPSec/PPTP/L2TP Pass-through QoS  IP Type of service(ToS)  802.1p Device Management  HTTP, TELNET, Console  Administration and operation software (firmware) upgradable locally by web(HTTP), console(TFTP)  SNMP Hardware Specification Ports  1 10/100M LAN Port(RJ45)  1 Line Port(RJ11) LED Indicators  LAN, ADSL, Alarm, ACT, Power Dimensions (W*D*H)  6.5*4.3*1.1 in.(165*108*28 mm) Environment  Operating Temperature: 0?~40? (32?~104?)   Storage Temperature: -40?~70? (-40?~158?)   Operating Humidity: 10%~90% non-condensing   Storage Humidity: 5%~90% non-condensing

... menos

The TP-Link ADSL2+ Modem Router (TD-8840T) is a 2-in-1 device that combines the functions of a DSL modem and 4-port 10/100 Ethernet router. It...... Más

The TP-Link ADSL2+ Modem Router (TD-8840T) is a 2-in-1 device that combines the functions of a DSL modem and 4-port 10/100 Ethernet router. It supports the latest ADSL2/2+ standards to provide higher performance (up to 24Mbps downstream) and longer reach from your Internet Service ProviderÂ’s (ISP) Digital Subscriber Line Access Multiplexer (DSLAM). You can also create a wired network to share your high-speed Internet connection, documents, photos, music, videos, and printers.   The TD-8840T includes a built-in QoS engine that helps prioritize Internet traffic to enable smooth Internet phone calls (VoIP) and lag-free online gaming. In addition, this device includes Dual Active Firewalls (Packet filtering and NAT) to help protect your network from potential attacks from across the Internet. Setting up the TD-8840T is simple since it automatically detects your DSL settings to quickly establish a connection to the Internet.   The TD-8840T also supports TR-069 which automatically updates the firmware and other settings when they become available from your ISP. Featuring high ADSL performance, various QoS policy, easy-to-use, TD-8840T is your best choice to access to the internet.   The device comes with a CD with an Easy Setup Assistant that helps you step by step to configure your Internet connection. This feature allows even novice users to setup the router products without sacrificing any key features, just play the AUTO-RUN CD bundled to have your network set up quickly & hassle-free.   Access a high-speed DSL Internet connection Up to 24Mbps downstream speed Supports Annex M, which can double upstream data rates Built-in switch connects four local PCs directly, and daisy-chain out to more hubs and switches as your network grows QoS prioritization based on ToS, DSCP, service type or 802.1p Triple Active Firewalls: SPI, NAT and Packet Filter Supports DHCP, Universal Plug-and-Play (UPnP), and includes a user-friendly Setup Wizard which takes you through configuring your network, step by step Administer and Upgrade the Router Remotely over the Internet Software Specification ADSL Features  Full-rate ANSI T1.413 Issue 2  ITU-T G.992.1 (G.dmt)  ITU-T G.992.2 (G.lite)  ITU-T G.994.1 (G.hs)  ITU-T G.992.3 (G.dmt.bis)  ITU-T G.992.5  Max 6 kilometers Data Rates  Downstream: Up to 24Mbps  Upstream: Up to 3.5Mbps (With Annex M enabled) ATM Features  UNI 3.1/4.0?ATM Adaptation Layer Type 5-AAL5  Multiprotocol encapsulation over ATM (RFC 1483)  UBR, CBR, VBR-rt, VBR-nrt  Supports 8PVCs PPP Features  PPP over ATM (RFC 2364)  PPP over Ethernet (RFC 2516) Switching Features  IGMP snooping  IGMP multicast  Port VLAN  Tag VLAN  IEEE 802.1d transparent learning bridging Routing Features  Classical IP and ARP over ATM (RFC 1577/2225), MER, RIP V1/V2  Static routing, IP, TCP, UDP, ARP  NAT, NAPT, DNS, DDNS, DHCP Server  UPnP, Virtual Server, DMZ  SIP, H323 ALG Security  Stateful Packet Inspection (SPI)  NAT  Packet Filter VPN Pass Through  IPSec/PPTP/L2TP Pass-through QoS  IP Type of service(ToS)  802.1p Device Management  HTTP, TELNET, Console  Administration and operation software (firmware) upgradable locally by WEB, TFTP, FTP, Console  SNMP V1/V2  CWMP(TR-069) Hardware Specification Ports  4 10/100M LAN Ports(RJ45)  1 Line Port(RJ11) LED Indicators  Power, ADSL, Internet, LAN1~4 Dimensions (W*D*H)  6.9*4.7*1.1 in.(174*120*28.8mm) Environment  Operating Temperature: 0?~40? (32?~104?)   Storage Temperature: -40?~70? (-40?~158?)   Operating Humidity: 10%~90% non-condensing   Storage Humidity: 5%~90% non-condensing

... menos

The TP-Link ADSL2+ Modem Router (TD-8817) is a 2-in-1 device that combines the functions of a DSL modem and 1-port 10/100 Ethernet router. It also...... Más

The TP-Link ADSL2+ Modem Router (TD-8817) is a 2-in-1 device that combines the functions of a DSL modem and 1-port 10/100 Ethernet router. It also provides a USB interface through which you can connect to the router. It supports the latest ADSL2/2+ standards to provide higher performance (up to 24Mbps downstream) and longer reach from your Internet Service ProviderÂ’s (ISP) Digital Subscriber Line Access Multiplexer (DSLAM). You can also create a wired network to share your high-speed Internet connection, documents, photos, music, videos, and printers.   The TD-8817 includes a built-in QoS engine that helps prioritize Internet traffic to enable smooth Internet phone calls (VoIP) and ag-free online gaming. In addition, this device includes Dual Active Firewalls (Packet filtering and NAT) to help protect your network from potential attacks from across the Internet.   Setting up the TD-8817 is simple since it automatically detects your DSL settings to quickly establish a connection to the Internet.   The TD-8817 also supports TR-069 which automatically updates the firmware and other settings when they become available from your ISP.   Featuring high ADSL performance, various QoS policy, easy-to-use, TD-8817 is your best choice to access to the internet.   The device comes with a CD with an Easy Setup Assistant that helps you step by step to configure your Internet connection. This feature allows even novice users to setup the router products without sacrificing any key features, just play the AUTO-RUN CD bundled to have your network set up quickly & hassle-free.   Access a high-speed DSL Internet connection Up to 24Mbps downstream speed Supports Annex M, which can double upstream data rates Connect your computer using Ethernet or USB QoS prioritization based on ToS, DSCP, service type or 802.1p Triple Active Firewalls: SPI, NAT and Packet Filter Supports DHCP, Universal Plug-and-Play (UPnP), and includes a user-friendly Setup Wizard which takes you through configuring your network, step by step Administer and Upgrade the Router Remotely over the Internet Software Specification ADSL Features  Full-rate ANSI T1.413 Issue 2  ITU-T G.992.1 (G.dmt)  ITU-T G.992.2 (G.lite)  ITU-T G.994.1 (G.hs)  ITU-T G.992.3 (G.dmt.bis)  ITU-T G.992.5  Max 6 kilometers Data Rates  Downstream: Up to 24Mbps  Upstream: Up to 3.5Mbps (With Annex M enabled) ATM Features  UNI 3.1/4.0?ATM Adaptation Layer Type 5-AAL5  Multiprotocol encapsulation over ATM (RFC 1483)  UBR, CBR, VBR-rt, VBR-nrt  Supports 8PVCs PPP Features  PPP over ATM (RFC 2364)  PPP over Ethernet (RFC 2516) Switching Features  IGMP snooping  IGMP multicast  Port VLAN  Tag VLAN  IEEE 802.1d transparent learning bridging Routing Features  Classical IP and ARP over ATM (RFC 1577/2225), MER, RIP V1/V2  Static routing, IP, TCP, UDP, ARP  NAT, NAPT, DNS, DDNS, DHCP Server  UPnP, Virtual Server, DMZ  SIP, H323 ALG Security  Stateful Packet Inspection (SPI)  NAT  Packet Filter VPN Pass Through  IPSec/PPTP/L2TP Pass-through QoS  IP Type of service(ToS)  802.1p Device Management  HTTP, TELNET, Console  Administration and operation software (firmware) upgradable locally by WEB, TFTP, FTP, Console  SNMP V1/V2  CWMP(TR-069) Hardware Specification Ports  1 10/100M LAN Ports(RJ45)  1 Line Port(RJ11)  1 USB 1.1 port LED Indicators  USB, LAN, ADSL, ACT, Power Dimensions (W*D*H)  6.5*4.3*1.1 in.(165*108*28 mm) Environment  Operating Temperature: 0?~40? (32?~104?)   Storage Temperature: -40?~70? (-40?~158?)   Operating Humidity: 10%~90% non-condensing   Storage Humidity: 5%~90% non-condensing

... menos

TD-8811 uses integrated ADSL2+ transceiver and a 256-MHz MIPS32 CPU.The AFE supports full-rate ADSL connectivity conforming to the ITU and ANSI...... Más

TD-8811 uses integrated ADSL2+ transceiver and a 256-MHz MIPS32 CPU.The AFE supports full-rate ADSL connectivity conforming to the ITU and ANSI specifications; MIPS32 CPU with MMU and 16-KB I-cache/8-KB D-cache is integrated into the device. In addition to the basic DMT physical layer functions, the ADSL PHY supports dual latency ADSL Framing (fast and interleaved) and the I.432 ATM Physical Layer.TD-8811 is a complete plug-and-play solution. With standard Ethernet interface, it can be directly connected to any 10M/100M Ethernet devices,supporting Auto MDI/MDIX. TD-8811 not only use html (web mode through Ethernet port) to configure the MODEM but also use external utility software, too. With TP-LINK´s excellent design of circuit and high quality production, we guarantee ADSL MODEM a high performance, very good stability and easy to use.   Access a high-speed DSL Internet connection Up to 24Mbps downstream speed Supports Annex M, which can double upstream data rates Connect your computer using Ethernet or USB Built-in DHCP server Administer and Upgrade the Router Remotely over the Internet Easily configure the router with the attached utility Software Specification ADSL Features  Full-rate ANSI T1.413 Issue 2  ITU-T G.992.1 (G.dmt)  ITU-T G.992.2 (G.lite)  ITU-T G.994.1 (G.hs)  ITU-T G.992.3 (G.dmt.bis)  ITU-T G.992.5  Max 6 kilometers Data Rates  Downstream: Up to 24Mbps  Upstream: Up to 3.5Mbps (With Annex M enabled) ATM Features  UNI 3.1?ATM Adaptation Layer Type 5-AAL5  Multiprotocol encapsulation over ATM (RFC 1483)  UBR, CBR, VBR-rt, VBR-nrt  Supports 8PVCs PPP Features  PPP over ATM (RFC 2364)  PPP over Ethernet (RFC 2516) Switching Features  IEEE 802.1d transparent learning bridging Routing Features  Classical IP and ARP over ATM (RFC 1577/2225), MER  Static routing, IP, TCP, UDP, ARP  NAT, NAPT, DNS, DDNS, DHCP Server  UPnP, Virtual Server, DMZ, Port Trigger Security  NAT  IP filterling  MAC filtering  Parental control VPN Pass Through  IPSec/PPTP/L2TP Pass-through QoS  IP Type of service(ToS)  802.1p Device Management  HTTP, TELNET, Console  Administration and operation software (firmware) upgradable locally by web(HTTP), console(TFTP)  SNMP Hardware Specification Ports  1 10/100M LAN Port(RJ45)  1 Line Port(RJ11)  1 USB 1.1 port LED Indicators  USB, LAN, ADSL, Alarm, ACT, Power Dimensions (W*D*H)  6.5*4.3*1.1 in.(165*108*28 mm) Environment  Operating Temperature: 0?~40? (32?~104?)   Storage Temperature: -40?~70? (-40?~158?)   Operating Humidity: 10%~90% non-condensing   Storage Humidity: 5%~90% non-condensing

... menos

　   WBIG-634TRA 　 ADSL2+ Router + Wireless IEEE802.11b/g Router + 1 RJ-11 ADSL Port + 4 Port Switch + Annex A 　  ...... Más

　   WBIG-634TRA 　 ADSL2+ Router + Wireless IEEE802.11b/g Router + 1 RJ-11 ADSL Port + 4 Port Switch + Annex A 　   　  　 Pheenet WBIG-634TRA & B can support downstream transmission rates of up to 24Mbps and upstream transmission rates of up to 1Mbps. It supports PPPoA (RFC 2364 - PPP over ATM Adaptation Layer 5), RFC 1483/2684 encapsulation over ATM (bridged or routed) and PPP over Ethernet (RFC 2516) to establish a connection with ISP. The product also supports VC-based and LLC-based multiplexing. With the web management interface, users can easily configure the various functions of the WBIG-634TRA & B including DHCP server, NAT, virtual server, DMZ, access control, IP filter, Firewall, PPTP/IPSec/L2TP pass-through, DDNS, UPnP, Wireless and etc. Pheenet WBIG-634TRA & B is a high performance and high-speed device that provides a full rate of ADSL2+ standard with the superb reliability and a complete solution for home and office application. 　 　 　 　 　   　 　 1. Support ADSL standard G..992.1(G.dmt), G..992.2(G.lite), G..992.3(ADSL2), G..992.4(Splitterless ADSL2), G..992.5(ADSL2+) for Annex A 2. Support WEP(64/128-bit), WPA-PSK and WPA2-PSK Wireless security Functions 3. Support MAC Address Filtering 4. Support NAT , IP Sharing , Virtual Server and DMZ 5. Support IP QoS 6. ATM Layer with Traffic shaping QoS Support (UBR, CBR, VBR) 7. VPN Pass Through (IPSec/PPTP/L2TP) 8. DHCP Server and Client 9. ACL/IP Filter/UPnP/SNMP/DDNS access management 10. Web User Interface(Remote configuration) 11. Firmware Upgrade 　 　   　 　   Industrial Standard 　 --> 　 　   IEEE Standard IEEE 802.3 10BaseT Ethernet IEEE 802.3u 100BaseTX Fast Ethernet   　 　   ADSL Standard 1. Support downstream rates of up to 24Mbps and upstream rates of up to 1Mbps. 2. Compliant to ITU-T G.992.1 (G.dmt), G.992.2 (G.lite), G.992.3 (ADSL2), G.992.4 (splitterless ADSL2), G.992.5 (ADSL2+) for Annex A. (Annex A are supported in different H/W platform) 3. Supports Multi-Mode standard (ANSI T1.413, Issue 2; G.dmt (G.992.1); G.994.1 and G.996.1 (for ISDN only); G.991.1;G.lite (G992.2)). 4. Multiple Protocols over AAL5 (RFC 1483/2684). 5. PPP over AAL5 (RFC 2364). 6. PPP over Ethernet (RFC 2516).   　 　   Interface ADSL Port : RJ-11 x1 LAN Ports : 10/100 (Auto-MDI/MDI-X) UTP Ports x 4   　 　   RF 　 --> 　 　   Frequency Band 2.400~2.4835 GHz ISM band 　 　   Signal Type & Modulation 1. 802.11g: OFDM (64QAM, 16QAM, QPSK, BPSK) 2. 802.11b : DSSS(CCK, DQPSK,DBPSK)   　 　   Security 1. WEP(64/128-bit), WPA-PSK and WPA2-PSK 2. Support MAC Address Filtering 3. Disable Broadcast SSID   　 　   Antenna 1 x detachable Antenna (Reverse SMA Connector) 　 　   Sensitivity 802.11b: –83dBm@11Mbps –89dBm@2Mbps 802.11g: –87dBm@6Mbps –86dBm@9Mbps –85dBm@12Mbps –83dBm@18Mbps –80dBm@24Mbps –76dBm@36Mbps –71dBm@48Mbps –66dBm@54Mbps   　 　   Output Power 18dBm 　 　   Router & ADSL Features 　 --> 　 　   Protocol IP, NAT, ARP, ICMP, DHCP, PPPoE, PPPoA, IPoA, RIP1/2, DDNS 　 　   Routing 1. Virtual Server 2. TCP/IP RIP V1/V2 3. DHCP Server and Client   　 　   Security 1. DMZ 2. SPI Anti-DOS Firewall 3. IP Filter   　 　   VPN VPN Pass Through (IPSec/PPTP/L2TP) 　 　   Management 1. ACL (Access Control) 2. UPnP (Universal Plug and Play) 3. SNMP 4. Web-based configuration   　 　   Hardware 　 --> 　 　   chip CPU : TC3162P2 Front End : TC3085 Ralink RT2561ST+RT2527 Flash : 2M NOR Flash RAM : 8MB SDRAM   　 　   Environment Temperature : 10 ~ 40° C Humidity : 10 ~ 90 % (Non-Condensing)   　 　   Power Supply 12VDC, 1A 　 　   Dimensions 30 (H) x 187(w) x 105(D) mm 　 　   Certificate FCC , CE 　

... menos

Pagina nueva 1 　 WBIG-634TRB 　 ADSL2+ Router + Wireless IEEE802.11b/g Router + 1 RJ-11 ADSL Port + 4 Port Switch + Annex B ...... Más

Pagina nueva 1 　 WBIG-634TRB 　 ADSL2+ Router + Wireless IEEE802.11b/g Router + 1 RJ-11 ADSL Port + 4 Port Switch + Annex B 　 　 　 Pheenet WBIG-634TRA & B can support downstream transmission rates of up to 24Mbps and upstream transmission rates of up to 1Mbps. It supports PPPoA (RFC 2364 - PPP over ATM Adaptation Layer 5), RFC 1483/2684 encapsulation over ATM (bridged or routed) and PPP over Ethernet (RFC 2516) to establish a connection with ISP. The product also supports VC-based and LLC-based multiplexing. With the web management interface, users can easily configure the various functions of the WBIG-634TRA & B including DHCP server, NAT, virtual server, DMZ, access control, IP filter, Firewall, PPTP/IPSec/L2TP pass-through, DDNS, UPnP, Wireless and etc. Pheenet WBIG-634TRA & B is a high performance and high-speed device that provides a full rate of ADSL2+ standard with the superb reliability and a complete solution for home and office application. 　 　 　 　 　 　 　 1. Support ADSL standard G..992.1(G.dmt), G..992.2(G.lite), G..992.3(ADSL2), G..992.4(Splitterless ADSL2), G..992.5(ADSL2+) for Annex B 2. Support WEP(64/128-bit), WPA-PSK and WPA2-PSK Wireless security Functions 3. Support MAC Address Filtering 4. Support NAT , IP Sharing , Virtual Server and DMZ 5. Support IP QoS 6. ATM Layer with Traffic shaping QoS Support (UBR, CBR, VBR) 7. VPN Pass Through (IPSec/PPTP/L2TP) 8. DHCP Server and Client 9. ACL/IP Filter/UPnP/SNMP/DDNS access management 10. Web User Interface(Remote configuration) 11. Firmware Upgrade 　 　 　 　 　 　 　 　 Industrial Standard 　 --> 　 　 IEEE Standard IEEE 802.3 10BaseT Ethernet IEEE 802.3u 100BaseTX Fast Ethernet 　 　 ADSL Standard 1. Support downstream rates of up to 24Mbps and upstream rates of up to 1Mbps. 2. Compliant to ITU-T G.992.1 (G.dmt), G.992.2 (G.lite), G.992.3 (ADSL2), G.992.4 (splitterless ADSL2), G.992.5 (ADSL2+) for Annex B. (Annex B are supported in different H/W platform) 3. Supports Multi-Mode standard (ANSI T1.413, Issue 2; G.dmt (G.992.1); G.994.1 and G.996.1 (for ISDN only); G.991.1;G.lite (G992.2)). 4. Multiple Protocols over AAL5 (RFC 1483/2684). 5. PPP over AAL5 (RFC 2364). 6. PPP over Ethernet (RFC 2516). 　 　 Interface ADSL Port : RJ-11 x1 LAN Ports : 10/100 (Auto-MDI/MDI-X) UTP Ports x 4 　 　 RF 　 --> 　 　 Frequency Band 2.400~2.4835 GHz ISM band 　 　 Signal Type & Modulation 1. 802.11g: OFDM (64QAM, 16QAM, QPSK, BPSK) 2. 802.11b : DSSS(CCK, DQPSK,DBPSK) 　 　 Security 1. WEP(64/128-bit), WPA-PSK and WPA2-PSK 2. Support MAC Address Filtering 3. Disable Broadcast SSID 　 　 Antenna 1 x detachable Antenna (Reverse SMA Connector) 　 　 Sensitivity 802.11b: –83dBm@11Mbps –89dBm@2Mbps 802.11g: –87dBm@6Mbps –86dBm@9Mbps –85dBm@12Mbps –83dBm@18Mbps –80dBm@24Mbps –76dBm@36Mbps –71dBm@48Mbps –66dBm@54Mbps 　 　 Output Power 18dBm 　 　 Router & ADSL Features 　 --> 　 　 Protocol IP, NAT, ARP, ICMP, DHCP, PPPoE, PPPoA, IPoA, RIP1/2, DDNS 　 　 Routing 1. Virtual Server 2. TCP/IP RIP V1/V2 3. DHCP Server and Client 　 　 Security 1. DMZ 2. SPI Anti-DOS Firewall 3. IP Filter 　 　 VPN VPN Pass Through (IPSec/PPTP/L2TP) 　 　 Management 1. ACL (Access Control) 2. UPnP (Universal Plug and Play) 3. SNMP 4. Web-based configuration 　 　 Hardware 　 --> 　 　 chip CPU : TC3162P2 Front End : TC3085 Ralink RT2561ST+RT2527 Flash : 2M NOR Flash RAM : 8MB SDRAM 　 　 Environment Temperature : 10 ~ 40° C Humidity : 10 ~ 90 % (Non-Condensing) 　 　 Power Supply 12VDC, 1A 　 　 Dimensions 30 (H) x 187(w) x 105(D) mm 　 　 Certificate FCC , CE 　

... menos

　   WLO-2401AG 　 IEEE802.11a/b/g Dual Radio Mesh Wireless Outdoor Bridge / AP (100mW) 　   　  　 ...... Más

　   WLO-2401AG 　 IEEE802.11a/b/g Dual Radio Mesh Wireless Outdoor Bridge / AP (100mW) 　   　  　 PheeNet WLO-2401AG is an IEEE802.11a/b/g Mesh Wireless Outdoor Bridge/AP, which has two radios inside at the same time. In application point of view, because it has IP Routing function, it provides users more flexible and wide applications. WLO-2401AG, Mesh Wireless Outdoor Bridge/AP has very powerful security support, besides standard 64/128 / 152 bit WEP, IEEE802.1x, also it has Wireless Isolation, MAC Address Control, Protocol Filter, VPN Pass-Through to provide users more secured Wireless environment. Also, it has very user friendly WEB UI for easy installation, and management. Each WLO-2401AG, Mesh Wireless Outdoor Bridge/AP forms an individual operational mode, and it will automatically locate and associate to the existing Mesh network. The data is always transferred with the shortest and reliable route. Meanwhile, the network redundancy and high reliability are guaranteed. As more equipments installed, the infrastructure can be expanded more flexible and easily. Thus makes it the perfect solution for large scale deployment, such as WiFi city, and the Wireless ISP Local Loop. 　 　 　 　 　 1. 802.11a and 802.11g wireless LANs can be used simultaneously 2. High Speed data rate up to 54Mbps/108Mbps in “Turbo “ mode in 11g and 11a 3. 3 Way bridging for 802.3 and 802.11a/g 4. Hide SSID (Site Survey Prevention) 5. Denial Wireless 802.11abg “ANY” Station 6. IP Routing 7. Scalable WDS (Wireless Distribution System) up to 10 Link 8. Support for static and dynamic IEEE802.11 WEP keys of 64/128/152 bits, 802.11i compliant WPA/PSK, WPA/Enterprise(802.1x), 802.1x supported Port Based network access(EAP-MD5/TLS) with Radius client (user authentication and accounting), EAP-PEAP and EAP-TLS , EAP-TTLS support 9. PPPoE Authentication PAP/CHAP 10. MAC Access Control List 11. IP67 rated weatherproof housing 　 　   　 　   Industrial Standard 　 --> 　 　   Standard IEEE802.11a/b/g, IEEE802.3 10BaseT Ethernet, IEEE802.3u 100BaseTX Fast Ethernet, IEEE802.3x (full-duplex flow control) 　 　   Interface IEEE802.3 10/100Base-TX (RJ-45) for POE Ethernet RJ-45 Connector (WAN) x1 Ethernet RJ-45 Connector (LAN) x1 Console Port Connector x1 N-Type Connector x 2 　 　   Security WPA and WPA2 64/128bit WEP IEEE802.11x, 802.11i SSID Broadcast Disable Client Isolation MAC Address Control List 　 　   RF 　 --> 　 　   Frequency Band 2.4 GHz to 2.4835 GHz 5.725 GHz to 5.825 GHz 　 　   Signal and Modulation Type 802.11a/g : OFDM (BPSK,QPSK,16QAM,64QAM) 802.11b : DSSS (DBPSK,DQPSK,CCK) 　 　   Receiver Sensitivity 802.11a 6Mbps : -85dBm , 9Mbps : -84dBm , 12Mbps : -82dBm 18Mbps : -80dBm , 24Mbps : -77dBm , 36Mbps : -73dBm 48Mbps : -69dBm , 54Mbps : -68dBm 802.11b 1Mbps : -94dBm , 2Mbps : -91dBm , 5.5Mbps : -89dBm 11Mbps : -85dBm 802.11g 1Mbps : -95dBm , 2Mbps : -91dBm , 5.5Mbps : -84dBm 6Mbps : -90dBm , 11Mbps : -88dBm , 12Mbps : -82dBm 18Mbps : -80dBm , 24Mbps : -77dBm , 36Mbps : -73dBm 48Mbps : -72dBm , 54Mbps : -72dBm 　 　   Output Power 802.11a : 100mW(20dBm) 802.11b/g : 200mW(23dBm) 　 　   Channel Multi country Roaming (802.11d) 　 　   Operating Modes Access Point (AP) Repeater (WDS) Bridge (PTP, PTMP) Routing 　 　   Firewall Predefined service and Network Object MAC Binding IP and Port Rules DNAT Virtual Server 　 　   Management Web Configuration Console Management Telnet TFTP Firmware Update SNMP V2C, V3 QoS Routing Table Management Spanning Tree Backup 　 　   Protocol IPV4 / IPV6 NetBIOS DHCP Client List / Server IPX TCP/UDP ICMP RIP1, RIP2 PPPoE 　 　   Hardware 　 --> 　 　   Platform Intel IXP425, 266MHz SDRAM: 64Mbytes, Flash: 16Mbytes 　 　   Environment Operating Temperature : -30℃ to 75℃ Storage Temperature: -40℃ to 85℃ Humidity: 5%~95%( non-condensing) 　 　   Power Supply Power over Ethernet 　 　   Waterproof IP67 (up to IP68 for customized) 　 　   LED Indicators Power, Active 　 　   Dimensions 270 (L) × 202 (W) × 66 (H) mm 　 　   Certificate FCC , CE 　

... menos

Product Overview The Cisco ® SFE2010P 48-Port 10/100 Ethernet Switch (Figure 1) allows you to expand your network securely. It is optimized for maximum...... Más

Product Overview The Cisco ® SFE2010P 48-Port 10/100 Ethernet Switch (Figure 1) allows you to expand your network securely. It is optimized for maximum system availability, with fully redundant stacking, redundant power options, and dual images for resilient firmware upgrades. Network security is provided through IEEE 802.1Q VLANs, IEEE 802.1X port authentication, access control lists (ACLs), denial-of-service (DoS) prevention, and MAC-based filtering. Web-based configuration is secured using SSL. The enhanced quality of service (QoS) and traffic-management features help ensure clear and reliable voice and video communications. For wireless or voice over IP (VoIP) deployments, the Cisco SFE2010P supports the IEEE 802.3af standard for Power over Ethernet (PoE). Automatic load sensing in the power-control circuitry detects PoE on the end device before providing power. For safety, each port has independent overload and short-circuit protection, along with LED indicators to show power status. The switch provides 15W of available PoE power on up to 24 of the Fast Ethernet ports for powering PoE-enabled wireless access points or VoIP handsets. The maximum PoE available per switch for all ports is 360W The Cisco SFE2010P provides resilient stacking for up to four units, or 192 ports. A stack of units is managed as a single switch with one web management interface. The SFE2010P switch can coexist in a stack with the Cisco SFE2000 and SFE2000P 24-Port 10/100 Ethernet Switches and the Cisco SFE2010 48-Port 10/100 Ethernet Switch, for a maximum of 192 ports in a stack. The stacking capability includes master/backup unit behavior, ring and chain architecture, and hot insertion and removal of units. Software running on the Cisco SFE2010P switch interacts with provisioning, management, and security software on both the site's services router and the service provider's equipment. This interaction provides simple, one-step installation and access to web-administered features for the administrator and users. Simple, affordable network operations throughout the network's lifetime are the result. Features Â* Forty-eight 10/100 Ethernet ports Â* Two 10/100/1000 Ethernet ports (used as stacking ports if operated in stacking mode) Â* Two mini Gigabit Interface Converter (mini-GBIC) slots for fiber Gigabit Ethernet expansion Â* IEEE 802.3af PoE delivered over any of the forty-eight 10/100 ports Â* 15.4W available power to the Fast Ethernet ports for PoE-enabled wireless access points or VoIP handsets (maximum per-switch PoE delivery of 360W available for all ports) Â* Dual images for resilient firmware upgrades Â* 17.6-Gbps, nonblocking, store-and-forward switching capacity Â* Simplified QoS management enabled by queuing techniques using 802.1p, Differentiated Services (DiffServ), or type of service (ToS) traffic prioritization Â* Power redundancy when used with the Cisco RPS1000 380W Redundant Power Supply Unit Â* Fully resilient stacking for optimized growth with simplified management Â* ACLs for granular security and QoS implementation Â* Configuration and monitoring from a standard web browser Â* Secure remote management of the switch via Secure Shell (SSH) and SSL encryption Â* 802.1Q-based VLANs enable segmentation of networks for improved performance and security Â* Private VLAN Edge (PVE) simplifies network isolation of guest connections or autonomous networks Â* Automatic configuration of VLANs across multiple switches through Generic VLAN Registration Protocol (GVRP) and Generic Attribute Registration Protocol (GARP) Â* User/network port-level security via 802.1X authentication and MAC-based filtering Â* Increased bandwidth and added link redundancy with Link Aggregation Control Protocol (LACP) Â* Enhanced rate-limiting capabilities, including back pressure and multicast and broadcast flood control Â* Port mirroring for noninvasive monitoring of switch traffic Â* Mini jumbo frame support (1632 bytes) Â* Simple Network Management Protocol (SNMP) versions 1, 2c, and 3 and Remote Monitoring (RMON) support Â* Fully rack mountable using included rack-mounting hardware Specifications Table 1 gives the specifications, package contents, and minimum requirements for the Cisco SFE2010P 48-Port 10/100 Ethernet Switch. Table 1. Specifications for the Cisco SFE2010P 48-Port 10/100 Ethernet Switch: PoE Specifications Ports 48 RJ-45 connectors for 10BASE-T/100BASE-TX; two 10BASE-T/100BASETX/1000BASE-T ports; 2 mini-GBIC ports; console port; auto medium dependent interface (MDI) and MDI crossover (MDI-X); auto negotiate/manual setting; RPS port for connecting to redundant power supply unit Buttons Reset button Cabling type Unshielded twisted pair (UTP) Category 5 or better for 10BASE-T/100BASE-TX; UTP Category 5e or better for 1000BASE-T LEDs PWR, Fan, Link/Act, PoE, Speed, RPS, Master, Stack ID 1 through 8 Power over Ethernet Â* IEEE 802.3af PoE delivered over any of the forty-eight 10/100 ports Â* Maximum power of 15.4W to a Fast Ethernet port - 360W total available to all Fast Ethernet ports with regular AC power, 280W total available with a redundant power supply unit Performance Switching capacity 17.6 Gbps nonblocking Forwarding capacity 13 mpps (64-byte packets) Stacking Stack operation Â* Up to 192 ports in a stack Â* Hot insertion and removal Â* Ring and chain stacking options Â* Master and backup master for resilient stack control Â* Auto-numbering or manual configuration of units in stack Layer 2 MAC table size 8000 Number of VLANs 256 active VLANs (4096 range) VLAN Port-based and 802.1Q tag-based VLANs, protocol-based VLAN, management VLAN, multicast TV VLAN, PVE, GVRP Head-of-line (HOL) blocking HOL blocking prevention Layer 3 Layer 3 options Static routing; classless interdomain routing (CIDR); 60 static routes; IPv4 and IPv6; forwarding in silicon - wire-speed forwarding of Layer 3 traffic IPv6 IPv6 options IPv6 over Ethernet, dual stack, IPv6 over IPv4 network with Intra-Site Automatic Tunnel Addressing Protocol (ISATAP) tunnel, IPv6 neighbor discovery, IPv6 stateless address configuration, maximum transmission unit (MTU) discovery, WEB, SSL, Telnet, Ping, Traceroute, Simple Network Time Protocol (SNTP), Trivial File Transfer Protocol (TFTP), Simple Network Management Protocol (SNMP), RADIUS, ACL, QoS, protocol-based VLANs Management Web user interface Built-in web user interface for easy browser-based configuration (HTTP/HTTPS) SNMP SNMP versions 1, 2c, and 3 with support for traps SNMP MIBs RFC1213 MIB-2, RFC2863 interface MIB, RFC2665 Ether-like MIB, RFC1493 bridge MIB, RFC2674 extended bridge MIB (P-bridge, Q-bridge), RFC2819 RMON MIB (groups 1, 2, 3, and 9 only), RFC2737 entity MIB, RFC 2618 RADIUS client MIB, RFC 1215 traps RMON Embedded RMON software agent supports 4 RMON groups (history, statistics, alarms, and events) for enhanced traffic management, monitoring, and analysis) Firmware upgrade Â* Web browser upgrade (HTTP/HTTPS) and TFTP Â* Dual images for resilient firmware upgrades Port mirroring Traffic on a port can be mirrored to another port for analysis with a network analyzer or RMON probe. Other management Traceroute; single IP management; SSL security for web user interface; SSH; RADIUS; port mirroring; TFTP upgrade; Dynamic Host Configuration Protocol (DHCP) client; BOOTP; SNTP; Xmodem upgrade; cable diagnostics; Ping; syslog; Telnet client (SSH secure support) Security IEEE 802.1X 802.1X - RADIUS authentication, MD5 hash; guest VLAN; single/multiple host mode ACLs Â* Drop or rate limit based on source and destination MAC or IP address, protocol, port, VLAN, DSCP/IP precedence, TCP/ User Datagram Protocol (UDP) source and destination ports, 802.1p priority, Ethernet type, Internet Control Message Protocol (ICMP) packets, Internet Group Management Protocol (IGMP) packets, DHCP snooping, Address Resolution Protocol (ARP) inspection, and IP source address guard Â* Up to 1018 rules Availability Link aggregation Using IEEE 802.3ad LACP, up to 8 ports in up to 8 groups Storm control Broadcast, multicast, and unknown unicast Spanning Tree IEEE 802.1D Spanning Tree, IEEE 802.1w Rapid Spanning Tree, IEEE 802.1s Multiple Spanning Tree, and Fast Linkover DoS prevention DoS attack prevention IGMP (versions 1 and 2) snooping Limits bandwidth-intensive multicast traffic to only the requestors; supports 256 multicast groups Power redundancy Connection to redundant power supply unit for power redundancy Quality of Service Priority levels 4 hardware queues Scheduling Priority queuing and weighted round-robin (WRR) Class of service Port based; 802.1p VLAN priority based; IPv4/v6 IP precedence/ToS/DSCP based; DiffServ; classification and re-marking ACLs Rate limiting Ingress policer; egress rate control; per VLAN Statistics 16 meters Standards 802.3 10BASE-T Ethernet, 802.3u 100BASE-TX Fast Ethernet, 802.3ab 1000BASE-T Gigabit Ethernet, 802.3z Gigabit Ethernet, 802.3x flow control, 802.3ad LACP, 802.3af PoE, 802.1D Spanning Tree Protocol (STP), 802.1Q/p VLAN, 802.1w Rapid STP, 802.1s Multiple STP, 802.1X port access authentication Environmental Dimensions W x H x D 17.32 x 14.70 x 1.73 in. (440 x 375 x 44 mm) Unit weight 10.89 lb (4.94 kg) Power 100-240V 47-63 Hz, internal, universal; also equipped with external redundant power supply connector for external power supply, -48V DC Certification UL (UL 60950), CSA (CSA 22.2), CE mark, FCC Part 15 (CFR 47) Class A Operating temperature 32° to 104°F (0° to 40°C) Storage temperature -4° to 158°F (-20° to 70°C) Operating humidity 10% to 90%, relative, noncondensing Storage humidity 10% to 95%, relative, noncondensing Package Contents Â* Cisco SFE2010P 48-Port 10/100 Ethernet Switch Â* AC power adapter with power cord Â* 2 rack-mounting kits with 8 screws Â* CD-ROM with user documentation (PDF) included Â* Registration card Â* Console cable Minimum Requirements Â* Web browser: Mozilla Firefox version 1.5 or later; Microsoft Internet Explorer version 5.5 or later Â* Category 5 Ethernet network cable Â* TCP/IP, network adapter, and network operating system (such as Microsoft Windows, Linux, or Mac OS X) installed on each computer in the network Â* Provider support for CPE software version 1.2 or later Product Warranty 5-year limited hardware warranty with return to factory replacement and 90-day limited software warranty   Check the product package and contents for specific features supported. Specifications are subject to change without notice. Cisco Limited Warranty for Cisco Small Business Series Products This Cisco Small Business product comes with a 5-year limited hardware warranty with return to factory replacement and a 90-day limited software warranty. In addition, Cisco offers software application updates for bug fixes and telephone technical support at no charge for the first 12 months following the date of purchase. To download software updates, go to: http://www.cisco.com/go/smallbiz . Product warranty terms and other information applicable to Cisco products are available at http://www.cisco.com/go/warranty .

... menos

QB-8100-EPA-WD, Tsunami QB 8100 End Point, 300 Mbps, 2.4 and 5 GHz, MIMO 3x3, Type-N Connectors - WD PoE With over 20 years in wireless innovation,...... Más

QB-8100-EPA-WD, Tsunami QB 8100 End Point, 300 Mbps, 2.4 and 5 GHz, MIMO 3x3, Type-N Connectors - WD PoE With over 20 years in wireless innovation, Proxim introduces the Tsunami[tm] QB-8100, an incredibly costeffective, high performance and non-line-of-sight 4G point-to-point (PtP) wireless backhaul solution.With 300Mbps data rates in a complete ``Hop-in-a-Box'' solution, deployments in networks of all sizeswill enjoy a quick return on investment. With incredible channel capacity & flexibility, excellent spectrum efficiency and a highly evolved prioritization platform tailored to deliver voice, video and data applications, the Tsunami[tm] QB-8100 satisfies carriers, wireless service providers and Government organizations with requirements for fast and reliable 4G wireless backhaul. Leveraging the advantages of OFDM and the latest MIMO radio innovations, the Tsunami[tm] QB-8100 draws on Proxim's proprietaryWireless Outdoor Router Protocol (WORP) to deliver wireless performance in excess of 4G products on the markets today. World-class Performance Â* A Point-to-Point system that delivers a 300 Mbps data rate link at distances of over 5 miles (8 km) Â* Very low latency of the order of 2 to 3 ms to support voice and video applications over long distances Â* Built-in feature rich network protocols for bridging, routing and gateway functionality Non-Line-of-Sight and Advanced Features Â* Non-line-of-sight capable, utilizing OFDM and enhanced MIMO techniques to penetrate through obstructions better Â* Features dual Gigabit Ethernet ports with PoE out to power other devices like surveillance cameras and additional radios Â* Enables packet identification to create unique and sophisticated service rules and tiered service classes with ease Widest Range of Frequencies Â* Provides flexible channel planning with support for 4.9 - 6.0 GHz and 2.3 - 2.5 GHz frequencies Â* Operates in licensed and unlicensed frequency spectrums and comes as a complete “Hop-In-A-Box” with a set of accessories for even greater ease of installation Carrier-grade Security Â* Implements tiered security layers for the most secure outdoor wireless communications in the unlicensed frequency spectrum Â* Utilizes ProximÂ’s Wireless Outdoor Routing Protocol (WORP), which prevents snooping, and features highly-secure remote management via SSL, SSH and SNMPv3 Â* Provides advanced AES encryption for military-grade over-the-air communications and radio mutual authentication eliminates unauthorized use of the system by rogue subscriber units and man-in-themiddle attacks Cost Effective and Ease of Use for Quick Return on Investment Â* Complete “Hop-In-A-Box” compact outdoor formfactor allows unprecedented ease of installation Â* Suitable for the carriers,WISP and Governmentmarkets Â* Certified for deployments in the Americas, Europe and Asia Â* Themost cost-effective, high performance point-to-point solution fromProxim, enabling any deployment to enjoy a quick return on investment

... menos

Presenting a Wireless Backhaul Solution that Exceeds 4G Speed Requirements with 300Mbps Bandwidth and Up To 100Mbps TCP/UDP Throughput With over 20...... Más

Presenting a Wireless Backhaul Solution that Exceeds 4G Speed Requirements with 300Mbps Bandwidth and Up To 100Mbps TCP/UDP Throughput With over 20 years in wireless innovation, Proxim introduces the Tsunami QB-8100, an incredibly costeffective, high performance and non-line-of-sight 4G point-to-point (PtP) wireless backhaul solution.With 300 Mbps data rates and up to 100 Mbps of real TCP/UDP throughout in a complete “Hop-in-a-Box” solution, deployments in networks of all sizes will enjoy a quick return on investment. With incredible channel capacity & flexibility, excellent spectrum efficiency and a highly evolved prioritization platform tailored to deliver voice, video and data applications, the Tsunami QB-8100 satisfies carriers, wireless service providers and Government organizations with requirements for fast and reliable 4G wireless backhaul. Leveraging the advantages of OFDM and the latest MIMO radio innovations, the Tsunami QB-8100 draws on ProximÂ’s proprietaryWireless Outdoor Router Protocol (WORP) to deliver wireless performance in excess of 4G products on the markets today. World-class Performance Â* A Point-to-Point system that delivers up to 100 Mbps of real TCP/UDP throughput at distances of over 5 miles (8 km) Â* Very low latency of the order of 2 to 3 ms to support voice and video applications over long distances Â* Built-in feature rich network protocols for bridging, routing and gateway functionality Non-Line-of-Sight and Advanced Features Â* Non-line-of-sight capable, utilizing OFDM and enhanced MIMO techniques to penetrate through obstructions better Â* Features dual Gigabit Ethernet ports with PoE out to power other devices like surveillance cameras and additional radios Â* Enables packet identification to create unique and sophisticated service rules and tiered service classes with ease Widest Range of Frequencies Â* Provides flexible channel planning with support for 4.9 - 6.0 GHz and 2.3 - 2.5 GHz frequencies Â* Operates in licensed and unlicensed frequency spectrums and comes as a complete “Hop-In-A-Box” with a set of accessories for even greater ease of installation Carrier-grade Security Â* Implements tiered security layers for the most secure outdoor wireless communications in the unlicensed frequency spectrum Â* Utilizes ProximÂ’s Wireless Outdoor Routing Protocol (WORP), which prevents snooping, and features highly-secure remote management via SSL, SSH and SNMPv3 Â* Provides advanced AES encryption for military-grade over-the-air communications and radio mutual authentication eliminates unauthorized use of the system by rogue subscriber units and man-in-themiddle attacks Cost Effective and Ease of Use for Quick Return on Investmen t Â* Complete “Hop-In-A-Box” compact outdoor formfactor allows unprecedented ease of installation Â* Suitable for the carriers,WISP and Governmentmarkets Â* Certified for deployments in the Americas, Europe and Asia Â* Themost cost-effective, high performance point-to-point solution fromProxim, enabling any deployment to enjoy a quick return on investment

... menos

Presenting a Wireless Backhaul Solution that Exceeds 4G Speed Requirements with 300Mbps Bandwidth and Up To 100Mbps TCP/UDP Throughput With over 20...... Más

Presenting a Wireless Backhaul Solution that Exceeds 4G Speed Requirements with 300Mbps Bandwidth and Up To 100Mbps TCP/UDP Throughput With over 20 years in wireless innovation, Proxim introduces the Tsunami QB-8100, an incredibly costeffective, high performance and non-line-of-sight 4G point-to-point (PtP) wireless backhaul solution.With 300 Mbps data rates and up to 100 Mbps of real TCP/UDP throughout in a complete “Hop-in-a-Box” solution, deployments in networks of all sizes will enjoy a quick return on investment. With incredible channel capacity & flexibility, excellent spectrum efficiency and a highly evolved prioritization platform tailored to deliver voice, video and data applications, the Tsunami QB-8100 satisfies carriers, wireless service providers and Government organizations with requirements for fast and reliable 4G wireless backhaul. Leveraging the advantages of OFDM and the latest MIMO radio innovations, the Tsunami QB-8100 draws on ProximÂ’s proprietaryWireless Outdoor Router Protocol (WORP) to deliver wireless performance in excess of 4G products on the markets today. World-class Performance Â* A Point-to-Point system that delivers up to 100 Mbps of real TCP/UDP throughput at distances of over 5 miles (8 km) Â* Very low latency of the order of 2 to 3 ms to support voice and video applications over long distances Â* Built-in feature rich network protocols for bridging, routing and gateway functionality Non-Line-of-Sight and Advanced Features Â* Non-line-of-sight capable, utilizing OFDM and enhanced MIMO techniques to penetrate through obstructions better Â* Features dual Gigabit Ethernet ports with PoE out to power other devices like surveillance cameras and additional radios Â* Enables packet identification to create unique and sophisticated service rules and tiered service classes with ease Widest Range of Frequencies Â* Provides flexible channel planning with support for 4.9 - 6.0 GHz and 2.3 - 2.5 GHz frequencies Â* Operates in licensed and unlicensed frequency spectrums and comes as a complete “Hop-In-A-Box” with a set of accessories for even greater ease of installation Carrier-grade Security Â* Implements tiered security layers for the most secure outdoor wireless communications in the unlicensed frequency spectrum Â* Utilizes ProximÂ’s Wireless Outdoor Routing Protocol (WORP), which prevents snooping, and features highly-secure remote management via SSL, SSH and SNMPv3 Â* Provides advanced AES encryption for military-grade over-the-air communications and radio mutual authentication eliminates unauthorized use of the system by rogue subscriber units and man-in-themiddle attacks Cost Effective and Ease of Use for Quick Return on Investment Â* Complete “Hop-In-A-Box” compact outdoor formfactor allows unprecedented ease of installation Â* Suitable for the carriers,WISP and Governmentmarkets Â* Certified for deployments in the Americas, Europe and Asia Â* Themost cost-effective, high performance point-to-point solution fromProxim, enabling any deployment to enjoy a quick return on investment

... menos

Item Description AWDS-R02 Wireless Router is a high-performace Router with the built-in ADSL modem can support ADSL link downstream up to 24Mbps and up...... Más

Item Description AWDS-R02 Wireless Router is a high-performace Router with the built-in ADSL modem can support ADSL link downstream up to 24Mbps and up stream up to 2Mbps. The four port 10/100Mbps switch can let user link up to 4 pcs or laptops to share the internet connection. The advanced firewall features can protect the attacking via Internet. The web user interface can help user to manage or set up the router very easy. Integrated with wireless AP which supports IEEE 802.11b/g wireless standard user can easy to connect to the router via wireless and enjoy the internet gaming at any place of his home. FEATURES Compliant IEEE 802.11g and 802.11b Standards ANSI T1.413 Issue 2, ITU-T G.992.2 (G.lite) and G.992.1 (G.dmt) compliant for Annex A, B and U-R2, ITU-T G.992.3, G.992.4 for ADSL2, ITU-T G.992.5 for ADSL2+ Supports downstream rates at up to 24Mbps and upstream rates at up to 2Mbps PPPoA (RFC2364), PPPoE (RFC2516), classical IPOA (RFC1577), multiple protocol over AAL5 (RFC1483, RFC2684), DHCP client mode support  DHCP server and client mode, NAT/NAPT support  Dynamic Domain Name System (DDNS)  Software DMZ and Port Forwarding  4-port 10/100Mbps autoc-rossover (MDI/MDI-X) - Switch compliant with IEEE802.3 and IEEE802.3u  Ethernet to ADSL-self-learning (up to 128MAC) transparent bridging compliant with IEEE802.1d  Compliant IEEE 802.11b/g standard  Up to 54Mbps data rate for wireless networks  Supports 64/128-bit WEP, WPA, WPA2 for wireless security  Firmware upgraded via Web-based GUI.   Specification   Model AWDS-R02 Interface 4 RJ-45 for Ethernet, 10/100M 1 RJ-11 for ADSL line 2 Antennas 1 Power Jack Standards ITU-T G.992.1(G.lite), G.992.2(G.dmt), G.992.3, G.992.4, G.992.5 ANSI T1.413 issue 2 IEEE 802.3, 802.3u 10/100M Ethernet standard IEEE 802.11b, 802.11g Wireless standard ATM Features WAN Mode Support : PPP Over ATM (RFC2364) and PPP Over Ethernet (RFC2516) LAN Mode Support : Routed / Bridge Ethernet Over ATM (RFC-2684) Classical Internet Protocol Over ATM (RFC-1577) CBR / UBR / UBR with PCR Shaping / VBR-rt / VBR-nrt Supports 8 ATM VCs Wireless Features Support IEEE 802.11g, 802.11b Wireless Access Point Support 128-Bit and 64-Bit WEP encryption, WPA-PSK Data rate : Up to 54Mbps Transmit Power : 15 dBm Receive Sensitivity : 11Mbps : -80dBm /54Mbps : -65dBm Router Features DHCP Server and Client NAPT (Network Address and Port Translation) NAT (Network Address Translation) ICMP (Internet Control Message Protocol) DDNS (Dynamic Domain Name Service) Device Management Firmware upgrade via Web console WAN and LAN side connection statistics Configuration of static routes and routing table Configuration of NAT / NAPT Password protected access Selection of Bridge or Router Mode PPP user ID and password Configuration of VCs (Virtual Circuits) Security Built-in Firewall Access Control Packet filtering Password protection for system managemen Power 9V DC, 1.5A Environment Temperature : 0℃ -55 ℃ Humidity : 10% - 90%, non-condensing Certifications CE, FCC

... menos

***CUSTOMER NOTICE: SANOXY WIRELESS REPEATER SHOULD HAVE ORIGINAL SANOXY PACKAGING AND SANOXY LOGO ON THE PRODUCT. SANOXYTMWireless N Access Point...... Más

***CUSTOMER NOTICE: SANOXY WIRELESS REPEATER SHOULD HAVE ORIGINAL SANOXY PACKAGING AND SANOXY LOGO ON THE PRODUCT. SANOXYTMWireless N Access Point AP/Repeater 2T2R-300M WiFi Repeater 802.11N/B/G Network Router Range Expander /Extender The Wireless-N Repeater is mainly used for providing free WiFi service in big area such as factory, community, street or etc. It complies with the IEEE 802.11n standard with wireless transmission speeds of up to300Mbps. It has 2dBi Antennas providing even better wireless performance, transmission rates, stability technology automatically avoids channel conflicts using its channel selection feature. It also works well with other 802.11g and 802.11n protocol wireless products. Mode: AP /Client/Repeater/Bridge/Router Brand:SANOXYTM Product Name: Wireless N Wifi Repeater Network Router 802.11N 300Mbps 300M Range Expander for computre tablet pc. Includes a built-in Fast Ethernet port, which works as a wireless bridge to connect any wired Ethernet device to your network. It is compatible with gaming devices like the Nintendo Wii, Sony PlayStation etc. Specifications - Wireless Data Transfer Rate: 300 Mbps - Supports 802.11b, 802.11g and 802.11n Adapters Operating on 2.4Ghz - Includes 1 Port Access Point - Wired Data Transfer Rate: 10/100 Mbps (Ethernet 10 Base-T) - Routing and Firewall Protocol: DHCP - Antenna: (2) Internal extend your existing wireless wifi connection and cover dead spots

... menos

LANCOM OAC-54-1 Wireless  c o n n e c t i n g y o u r b u s i n e s s Dual-band outdoor access client with integrated antenna for bridging large...... Más

LANCOM OAC-54-1 Wireless  c o n n e c t i n g y o u r b u s i n e s s Dual-band outdoor access client with integrated antenna for bridging large distances 54/108 Mbps radio module for IEEE 802.11a/h or 802.11b/g modes Integrated directional antennas plus two external antenna connectors Antenna gain: 2.4 GHz: 13.5 dBi, 5 GHz: 15.5 dBi 1000 EIRP mW permitted transmission power in the 5 GHz band Professional management functions, VLAN and QoS Extremely robust IP-67 protective housing Temperature range -30° to +70° Celsius The LANCOM OAC-54-1 Wireless features a robust IP-67 aluminum housing and integrated directional antenna. It is ideal for the outdoor provision of stationary or mobile connectivity for wireless LAN clients. Compact and versatile. The internal wireless LAN module in the LANCOM OAC-54-1 operates at either 2.4 GHz or 5 GHz. Permitted transmission powers of up to 1000 mW in the 5 GHz band allow wireless bridges to operate even over several kilometers. The client functions as a transparent WLAN-to-Ethernet converter and can be operated as a cost- effective terminator for a wireless LAN bridge. Security and reliability. LANCOM guarantees you communications with the highest standards of security with an extensive range of encryption and authentication mechanisms. VLAN technology and matured Quality- of-Service functions enable the reliable transmission of video and multimedia data streams. Extensive range of accessories. The LANCOM OAC-54-1 Wireless is shipped with a full set of accessories including mounting materials, outdoor cables and the appropriate standards-compliant 802.3af PoE adapter. The LANCOM Outdoor Installation Guide provides all the necessary information for professional outdoor planning and installation, as well as the appropriate measures for lightning and surge protection. The external antenna connectors allow different types of LANCOM antennas to be used. See the Antenna Distance Calculator at www.lancom.eu for an initial overview of potential ranges and data- transfer speeds. More Reliability for the Future. From the earliest days, LANCOM products have been designed for a product life of several years. They are equipped with hardware which is dimensioned for the future. Even reaching back to older product generations, updates to the LANCOM Operating System—LCOS—are available several times a year, free of charge and offering major features. LANCOM offers unbeatable protection of your investment!   Frequency band 2.4 GHz or 5 GHz (EU compliance) 2400 -2483.5 MHz (ISM) or 5150 -5750 MHz or 5725-5825 MHz (UK only) Antenna Gain 13.5 dBi in 2.4 GHz, 15.5 dBi in 5 GHz HPBW 2.4 GHz: 30° horizontal, 40° vertical 5 GHz: 17.5° horizontal, 15.5° vertical Data rates 2.4 GHz 54 Mbps to IEEE 802.11g (fallback to 48, 36, 24, 18, 12, 9, 6 Mbps, Automatic Rate Selection) compatible to IEEE 802.11b (11, 5.5, 2, 1 Mbps, Automatic Rate Selection), 802.11 b/g compatibility mode or pure g or pure b, Super A/G with Turbo Mode (108 Mbps), bursting, compression Data rates 5 GHz 54 Mbps to IEEE 802.11a/h (fallback to 48, 36 , 24, 18, 12, 9, 6 Mbps, Automatic Rate Selection), Super A/G with Turbo Mode (108 Mbps), bursting, compression, fully compatible with TPC (adjustable power output) and DFS (automatic channel selection, radar detection) according to ETSI regulations. Range The actual range depends on the environmental conditions. The Antenna Distance Calculator on www.lancom.de provides information on the possible data rates and distances. Maximum transmission power 2.4 GHz 802.11b/g: 20 dBm/100 mw EIRP with transmission power control (TPC) and manual power settings Maximum transmission power 5 GHz 802.11a/h: 30 dBm/1000 mw EIRP with transmission power control (TPC) and manual power settings Minimum transmission power Transmission power reduction in software in 1 dB steps to min. 0.5 dBm Receiver sensitivity 2.4 GHz 802.11b: -95 dBm @ 1 MBit/s, -89 dBm @ 11 MBit/s; 802.11g: -90 dBm @ 6 MBit/s, -73 dBm @ 54 MBit/s Reception sensitivity 5 GHz '802.11a/h: -88 dBm @ 6 MBit/s, -71 dBm @ 54 MBit/s; Radio channels 2.4 GHz Up to 13 channels, max. 3 non-overlapping (2.4 GHz band) Radio channels 5 GHz Up to 19 non-overlapping channels (5 GHz band) with automatic dynamic channel selection (DFS 2) Q-in-Q tagging Support of layered 802.1q VLANs (double tagging) Security IEEE 802.11i / WPA2 with passphrase or 802.1x and hardware-accelerated AES, closed network, WEP64, WEP128, WEP152, user authentication, 802.1x /EAP Quality of Service Prioritization according to Wireless Multimedia Extensions (WME, subset of IEEE 802.11e) rewall Stateful inspection firewall Incoming/Outgoing Traffic inspection based on connection information Packet filter Check based on the header information of an IP packet (IP or MAC source/destination addresses; source/destination ports, DiffServ attribute); remote- site dependant, direction dependant, bandwidth dependant Extended port forwarding Network Address Translation (NAT) based on protocol and WAN address, i.e. to make internal webservers accessible from WAN N:N IP address mapping N:N IP address mapping for translation of IP addresses or entire networks Tagging The firewall marks packets with routing tags, e.g. for policy-based routing Actions Forward, drop, reject, block sender address, close destination port, disconnect Notification Via e-mail, SYSLOG or SNMP trap Traffic shaping Dynamic bandwidth management with IP traffic shaping Bandwidth reservation Dynamic reservation of minimum and maximum bandwidths, totally or connection bases, separate settings for send and receive directions DiffServ/TOS Priority queuing of packets based on DiffServ/TOS fields Packet- size control Automatic packet- size control by fragmentation or Path Maximum Transmission Unit (PMTU) adjustment. Layer 2/Layer 3 tagging Automatic or fixed translation of layer- 2 priority information (802.11p-marked Ethernet frames) to layer- 3 DiffServ attributes in routing mode. Translation from layer 3 to layer 2 with automatic recognition of 802.1p- support in the destination device. Intrusion Prevention Monitoring and blocking of login attempts and port scans IP spoofing Source IP address check on all interfaces: only IP addresses belonging to the defined IP networks are allowed Denial of Service protection Protection from fragmentation errors and SYN flooding General Detailed settings for handling reassembly, PING, stealth mode and AUTH port URL blocker Filtering of unwanted URLs based on DNS hitlists and wildcard filters Password protection Password-protected configuration access can be set for each interface Alerts Alerts via e-mail, SNMP-Traps and SYSLOG WLAN protocol filters Limitation of the allowed transfer protocols, source and target addresses on the WLAN interface Reset Plug Adjustable reset for "ignore", "boot- only" and "reset- or-boot" IP redirect Fixed redirection of any packet received over the WLAN interface to a dedicated target address FirmSafe For completely safe software upgrades thanks to two stored firmware versions, incl. test mode for firmware updates Router IP and NetBIOS/IP multi-protocol router Advanced Routing and Forwarding Separate processing of 8 contexts due to virtualization of the routers. Mapping to VLANs and complete independent management and configuration of IP networks in the device, i.e. individual settings for DHCP, DNS, Firewalling, QoS, VLAN, Routing etc. DNS DNS client, DNS server, DNS relay, DNS proxy and dynamic DNS client DHCP DHCP client, DHCP relay and DHCP server with autodetection NetBIOS NetBIOS/IP proxy Policy-based routing Policy- based routing based on routing tags. Based on firewall rules, certain data types are marked for specific routing, e.g. to particular remote sites or lines. Dynamic routing Dynamic routing with RIPv2. Learning and propagating routes; separate settings for LAN and WAN. Extended RIPv2 including HopCount, Poisoned Reverse, Triggered Update for LAN (acc. to RFC 2453) and WAN (acc. to RFC 2091) as well as filter options for propagation of routes IP ARP, proxy ARP, BOOTP, DHCP, DNS, HTTP, HTTPS, IP, ICMP, NTP/SNTP, NetBIOS, PPPoE (server), RADIUS, RIP- 1, RIP-2, RTP, SIP, SNMP, TCP, TFTP, UDP, VRRP, VLAN Bridge Redundancy 802.1d Spanning Tree and 802.1w Rapid Spanning Tree support for dynamic path selection with redundant layer 2 connections Ethernet PPPoE, Multi-PPPoE, ML-PPP, PPTP (PAC or PNS) and plain Ethernet (with or without DHCP), RIP- 1, RIP-2, VLAN, IP LAN 10/100Base-TX, autosensing, auto node hub, PoE compliant with IEEE 802.3af Serial interface Serial configuration interface / COM port (10 pin): 9,600 - 115,000 baud External antenna connectors Two N connectors(Main and Aux) for external LANCOM AirLancer Extender antennas or for antennas from other vendors. Integrated RF Switch in Main connector. When an external antenna is connected, the internal antenna is automatically disconnected. Please respect the restrictions which apply in your country when setting up an antenna system. For information about calculating the correct antenna setup, please refer to www.lancom-systems.com. Management LANconfig Configuration program for Microsoft Windows, incl. convenient Setup Wizards. Optional group configuration, simultaneous remote configuration and management of multiple devices over IP connection (HTTPS, HTTP, TFTP). Configuration program preferences per project or user or global LANmonitor Monitoring application for Microsoft Windows for (remote) surveillance and logging of the status of LANCOM devices and connections, incl. PING diagnosis and TRACE with filters and save to file Webconfig Integrated web server for the configuration of LANCOM devices via Internet browsers with HTTPS or HTTP Access rights Individual access and function rights for up to 16 administrators User administration RADIUS user administration for dial- in access (PPP/PPTP). Support for RADSEC (Secure RADIUS) providing secure communication with RADIUS servers Remote maintenance Remote configuration with Telnet/SSL, SSH (with password or public key), browser (HTTP/HTTPS), TFTP or SNMP, firmware upload via HTTP/HTTPS or TFTP. A remote configuration for devices behind der LANCOM can be accomplished (after authentication) via tunneling of arbitrary TCP-based protocols, e.g. for HTTP(S) remote maintenance of VoIP phones or printers of the LAN Security Access rights (read/Write) over WAN or (W)LAN can be set up separately (Telnet/SSL, SSH, SNMP, HTTPS/HTTP), access control list Scripting Scripting function for batch-programming of all command- line parameters and for transferring (partial) configurations, irrespective of software versions and device types, incl. test mode for parameter changes SNMP SNMP management via SNMP V2, private MIB exportable by WEBconfig, MIB II Timed control Scheduled control of parameters and actions with CRON service TFTP TFTP client and server with variable file names (name, MAC/IP address, serial number) Diagnosis Extensive LOG and TRACE options, PING and TRACEROUTE for checking connections, LANmonitor status display, internal logging buffer for SYSLOG and firewall events Power supply Via Power over Ethernet, compliant with IEEE 802.3af, 1 x PoE Injector supplied Environment -30°C to +70°C at 95% max. humidity (non condensing), saltwater testing according to EN60068-2-52 Housing Robust metal housing, IP 67 protection rating, ready for wall and pole mounting, 3 LEDs for status display Power consumption (max) ca. 9 Watts

... menos